Dixon Valve Boss Ground Joint Spuds
Product Details:
The spud part of the coupling serves as one half of the Boss Ground Joint connection and is usually fixed to the equipment
The stem part that is clamped to the hose is the other half
The two halves are connected or disconnected by rotating the wing nut on the spud
When connected they achieve both a mechanical and a pressure seal
Leakproof and easy to seal.
There are currently no resources for this product.
Body Material
Plated Steel
Connection Type
Male/Male
Length [Nom]
3 5/32 in
Male Thread
2 in
Material
Plated Iron
Operating Temp. [Max]
450 °F
Thread - TPI or Pitch
2 in
Type
Connector
Used With
Boss Ground Joint Fitting; Hose
Width [Nom]
3/4 in
Wt.
2.3 lb
Country of Origin
United States
NOTE: Country of Origin information is based on information provided by product manufacturers and other third parties. ORS Nasco Inc. has not independently verified this information and does not warrant its accuracy.