Jet® Horizontal/Vertical Bandsaws
Product Details:
Versatility and power when cutting in either a horizontal or vertical position
Heavy-Duty 14-gauge steel stand
Blade drive is a sealed, steel, heat treated worm driving a bronze worm gear in an oil bath
Handle and wheels for easy movement
Ball bearing supported blade wheel
Fully adjustable ball bearing blade guides
Auto shut off after cut
Vertical work table
Assembly required.
There are currently no resources for this product.
Amps [Nom]
9/4.5 - Full load amps; 10.1 - Starting amps; 4.9 - Running amps (no load)
Blade Length [Nom]
64 1/2 in
Blade Thickness [Nom]
0.025 in
Blade Width [Nom]
1/2 in
Control Type
Toggle on/off switch
Cutting Cap. 2
5 in (Round Stock at 90°); 3 in (Round Stock at 45°); 5 ¾ in x 5 in and 6 in x 2 in (Rectangular Stock at 90°); 4 ½ in x 3 in (Rectangular Stock at 45°)
Drive Gearing
Worm Gearing
Handle Type
Moving Handle (used to relocate machine and not during operation of machine)
Height [Nom]
41.34 in
Length [Nom]
37 in
Linear Speed [Max]
200 ft/min
Linear Speed [Min]
80 ft/min
Type
Horizontal/Vertical Bandsaw
Voltage [Nom]
115 V
Voltage Type
AC
Width [Nom]
17.72 in
Wt.
115 lb
Country of Origin
Taiwan
NOTE: Country of Origin information is based on information provided by product manufacturers and other third parties. ORS Nasco Inc. has not independently verified this information and does not warrant its accuracy.