Welcome to ORS Nasco, Guest Sign In
Continue shopping
Image may not represent exact item.
HY 4070 Hybrid Gel Adhesives, 10 mL Cartridge, Clear, 10/Case
Manufacturer: LOCTITE
Item #: 442-2264448

Loctite® HY 4070TM Hybrid Gel Adhesives

Product Details:
Two-part, transparent, cloudy colorless to pale yellow cyanoacrylate/acrylic hybrid gel adhesive
Provides a fast fixture at room temperature
It suits various substrates including most plastics, rubbers and metals
Used where complete cure of excess adhesive, as well as temperature and moisture resistance, is required
Gel consistency prevents adhesive flow, even on vertical surfaces
Curing is initiated on mixing the Part A and Part B components
Handling strength is achieved rapidly
Full strength is achieved over time
Adhesive Tensile Shear0.1 N/mm²
Applicable MaterialsMetal; Plastic; Rubber
Application Temp. Range [Max]+25 °C
Capacity Vol. [Nom]10 mL
Chemical CompoundEthyl 2-Cyanoacrylate; Methacrylate
Country of OriginIE
Elongation [Nom]4.9 %
Fix Cure Time @ Temp.4 min to 6 min (2 mm Gap) @ +25 °C; <60 s (0.05 mm
Fixture Time4 min to 6 min (2 mm Gap); <60 s (0.05 mm Gap)
Flash Point [Nom]+176 °F to +199.4 °F (Part A); +230 °F (Part B)
Gap Fill [Nom]0.05 mm
Hardness [Nom]65 Shore D
Packing TypeCartridge
Physical FormGel
ResistanceMoisture; Temperature
Special OrderYES
Specific Gravity [Nom]1.05 to 1.1
Temp. Range [Max]+25 °C
Tensile Strength [Nom]2117 psi
TypeHybrid Gel Adhesive
VOC< 3 %
Viscosity [Max]1300 mPa (Part A); 30 mPa (Part B)
Viscosity [Min]1 mPa (Part B); 200 mPa (Part A)
Viscosity [Nom]1 to 30 mPa (Part B); 200 mPa to 1300 mPa (Part A)
Working Time [Max]4 min
Working Time [Min]1 min
Working Time [Nom]1 min to 4 min
Wt.11 g
NOTE: Country of Origin information is based on information provided by product manufacturers and other third parties. ORS Nasco Inc. has not independently verified this information and does not warrant its accuracy.